At a glance
Electric gates in Lisburn, in short
Lisburn's gate jobs range from brand new housing off the Ballinderry Road to farmhouses that have stood for a century, and both start with the same free survey. We fit CAME and BFT motors, build in safety edges and photocells as standard, and configure fobs, a keypad, intercom and app control around how the property is used.
A growing city
Lisburn is building fast, and gates need to keep up.
Lisburn has grown quickly over the last decade, and a lot of our work here is on newer estates off the Ballinderry Road, around Knockmore and Ballymacash, where plots are close together and the run-in from the footpath to the garage door is short. A compact sliding gate or an underground swing motor set close to the boundary usually suits these driveways better than a gate that needs room to swing out over the pavement.
Away from the new estates, the older farmhouses and detached properties towards Hillsborough, Dromore and Maze still make up a good share of the work, and those jobs look nothing like the estate jobs. Long lanes, sloped entrances and no power anywhere near the gate are normal, so a sliding gate on a cantilever rail, run from a solar kit, is often the practical answer rather than digging a cable run across a field.
Business and industry
Lisburn's industrial estates want a gate that works hard.
Lisburn carries a lot of Northern Ireland's industrial and distribution space, and units around Lissue Industrial Estate, Charlestown Business Park and the Ballinderry Road corridor typically want a wide sliding gate that closes itself after hours, a keypad with individual codes for staff, and a camera watching the entrance rather than a single shared fob. We size the motor to the weight of the gate and set the timings to suit shift patterns.
New boundary work in the borough falls under Lisburn and Castlereagh City Council. Permission is generally needed once a new gate or fence passes one metre beside the road, or two metres set back, though that covers a new structure rather than automating one already standing. Hillsborough's conservation area and listed buildings call for extra care with materials and design, which we raise at the survey.
How it works in Lisburn
From enquiry to a working gate
- 1
Book a free survey
We visit your Lisburn property, measure the opening and the run-in, check the ground and the power supply, and talk through how you and your family want the gate to work.
- 2
A quote you can rely on
You get a fixed recommendation covering the gate type, the motor, the access devices and the safety kit, with everything priced and nothing added later.
- 3
Trades booked together
We coordinate the posts, the track or motor base, cable ducting and the power supply so any masonry and electrical trades are on site together rather than in separate visits.
- 4
Programmed and proven
Once the hardware is in, the system is programmed and put through its paces until the open, close and stop are smooth, quiet and reliable.
- 5
A proper handover
Before we leave, we walk through the intercom, the app, the fobs and the manual release with you, and remain on call afterwards for servicing or adding devices.
Typical Lisburn entrances
Matching the gate to the Lisburn plot
Every plot is different, but these are the patterns that come up most often around Lisburn.
| Property | Usual gate type | Power and access |
|---|---|---|
| New-build estate home with a short run-in | Compact sliding gate or underground swing motor | Mains, fobs and a keypad |
| Older farmhouse off a country lane | Sliding gate on a cantilever rail | Solar kit or armoured cable run, keypad |
| Business unit on an industrial estate | Wide sliding gate with a timed close | Mains, coded keypad, logged access, camera |
| Detached home near Hillsborough or Dromore | Underground swing motors, materials matched to the property | Mains, fobs, video intercom |
| Apartment block or managed development | Sliding gate with intercom per residence | Mains, app control, visitor codes |
Equipment we install
Trusted brands, professionally fitted
Our Lisburn installs use CAME and BFT gate automation, chosen because parts and support are still available on systems fitted many years ago.
- CAME
- BFT
More Lisburn security work
Other services we provide in Lisburn
All fitted by the same local team, and able to share one app where that helps.