Intruder alarm installation, done properly.

Wired and wireless intruder alarms for homes and commercial premises, fitted by fully qualified installers and connected to an app on your phone. Pyronix and Texecom systems, pet-friendly detectors, optional monitoring.

At a glance

Wired or wireless

Pyronix and Texecom systems

App-connected

Arm and disarm remotely

Pet-friendly detectors

No false alerts from pets

Optional monitoring

Add a monitoring service later

Cameras Installed
0 +
Client Satisfaction
0 %
Google Rating
0 .0
Remote Monitoring
0 /7

What an intruder alarm installation involves

Intruder alarm installation is the fitting of a control panel, detectors and sounders that warn you and anyone nearby when a property is entered without permission. Coast Data Security surveys the building, specifies a wired or wireless Pyronix or Texecom system, and connects it to an app so you can arm, disarm and check the status from your phone.

What we install

An alarm built around how you actually use the building.

A bungalow, a two-storey house with a home office and a warehouse with a yard all need different detector layouts, different zoning and a different approach to who arms and disarms the system and when. We start with a walk round the property, working out entry points, the rooms that matter most and how the building is used day to day, before recommending a system.

Wired systems suit new builds and renovations where cable can be run before the walls are finished, and give a very stable, tamper-resistant installation. Wireless systems from Pyronix and Texecom suit existing properties where running cable would mean disruption, and detectors can be added or moved later without lifting a floor. Keypads, key fobs and a control panel sit at the core of both, with zones set up so parts of the building can be armed independently, such as a shop floor at night while an office above stays accessible.

  • Wired and wireless intruder alarm systems from Pyronix and Texecom
  • Door contacts, motion detectors and glass break sensors, zoned to the building
  • Pet-friendly detectors that ignore cats and dogs up to a set weight
  • Internal and external sounders, with a strobe where it is needed
  • App control for arming, disarming and checking status remotely

Living with the alarm

An alarm that works with the household, not against it.

The most common complaint about a badly specified alarm is false activations, usually from a detector that cannot tell a person from a pet, a draught or a spider. We fit pet-friendly detectors as standard where a household has a cat or a dog, set to ignore movement below a chosen weight, and we tune detector sensitivity to the room rather than leaving every zone on a factory default.

App control means you can arm the system on the way out if you forget, check whether it is set from work, and see which zone triggered if it goes off. Monitoring is optional rather than forced on every customer: some households are happy with a loud, visible alarm and an app alert, while others want the option to add a monitoring service later, and the system is specified so that can be added without starting again.

Fully Insured

Comprehensive public liability insurance on every job we do.

Insurance Approved

Systems that meet insurer requirements, potentially reducing premiums.

Expert Installation

Clean, professional work with full system configuration included.

Free Site Surveys

No-obligation quotes with detailed recommendations for your property.

Same-Day Response

Fast turnaround from enquiry to installation, minimising disruption.

Aftercare Support

Ongoing maintenance, upgrades, and responsive technical support.

Why us

Why homes and businesses choose us for intruder alarms.

Coast Data Security Ltd installs intruder alarms alongside CCTV, access control and gate automation, so an alert from a sensor can be checked against camera footage and door activity without logging into separate systems. All installers are fully qualified and carry comprehensive public liability insurance, and every handover includes a full walk-through of arming, disarming and what to do if a zone triggers.

How it works

From first call to your first arm and disarm

  1. 1

    Enquiry and free site survey

    Get in touch by phone or the online form. A technician walks the property, identifies entry points and the rooms that matter most, and asks about pets and how the building is used day to day.

  2. 2

    Design and written quote

    You get a recommendation for wired or wireless, the detector layout and how the zones should be split, priced in writing before any work is booked in.

  3. 3

    Installation

    Panel, detectors, sounders and keypads are fitted and cabled or paired, with cabling concealed on wired jobs and wireless devices sited carefully for a reliable signal.

  4. 4

    Programming and testing

    Zones, sensitivity and pet-friendly settings are configured to suit the building room by room, then every detector, sounder and keypad is tested carefully before handover to you.

  5. 5

    Handover and aftercare

    We show you the keypad, the app and how to arm, disarm and add users, and stay available for servicing, extra detectors or a monitoring upgrade later.

Wired, wireless or hybrid?

Which type of intruder alarm suits your property

Every building is different, so the survey decides, but here is how wired, wireless and hybrid alarms usually stack up.

Wired, wireless and hybrid intruder alarm systems compared
FeatureWiredWirelessHybrid
InstallationCable run to every detector, tidiest on new buildsDetectors pair to the panel, no cable runsCore detectors wired, extras added wirelessly
Best suited toNew builds and full renovationsExisting homes and officesExisting buildings with a planned extension
Adding detectors laterNeeds a new cable runStraightforward, pair and site the deviceStraightforward for the wireless portion
ReliabilityVery stable, immune to signal issuesDepends on battery life and signal strengthWired core stays stable, wireless extras need checks
Typical useCommercial premises, new-build homesExisting homes, flats, listed buildingsLarger sites mixing old and new areas

Equipment we install

Trusted brands, professionally fitted

We install Pyronix and Texecom systems, two UK intruder alarm manufacturers with a wide range of wired and wireless kit and long-term parts availability.

  • Pyronix
  • Texecom

Testimonials

Rated 5.0 on Google

“Excellent service from start to finish. Professional, tidy work and the picture quality is outstanding. Highly recommend to anyone looking for a reliable security installer.”

Satisfied Customer

Google Review

“Brilliant job on our business premises. Marijus was very knowledgeable and helped us choose the right system for our needs. Great value for money and fantastic aftercare support.”

Local Business Owner

Google Review

Intruder alarm questions, answered.

The things people ask before they book a survey.

How much does an intruder alarm cost?

An intruder alarm is quoted around the size of the building, the number of detectors, whether it is wired or wireless and how the zones are split. We put a full, itemised figure in writing after a free survey, with nothing added later.

How long does installation take?

A wireless alarm in an average house is usually finished within a day. Wired panels and larger commercial premises take longer because of the cabling involved, and the survey gives you a realistic idea of the timescale before any work starts.

Are your installers qualified and insured?

Yes. Coast Data Security only sends fully qualified technicians, and comprehensive public liability insurance is in place on every alarm we fit. We would rather assess the building properly than fit a standard kit regardless of the layout.

Which areas do you cover for intruder alarms?

We fit intruder alarms right across Northern Ireland from our base near Newry, taking in Belfast, Lisburn, Armagh, Bangor and the other towns on this page as standard territory. Outside that list, get in touch anyway; we still travel for most jobs.

I already have an alarm from another company. Can you take it over?

Often, yes, if the existing Pyronix or Texecom panel is in reasonable condition. We can service, extend or reprogram many existing systems, and where the panel is too old or unsupported we will say so and quote for a replacement.

Will the alarm go off every time my dog moves?

Not if it is specified properly. We fit pet-friendly detectors as standard for households with cats or dogs, set to ignore movement up to a chosen weight, so the alarm still catches an intruder without triggering on the pet.

Do I need a monitoring service?

No, it is optional. Many customers are happy with a loud sounder, a strobe and an app alert. If you want a monitoring service added, the system is specified so that can be arranged later without replacing the panel.

Can I arm and disarm the alarm from my phone?

Yes. Every system is set up with app control during handover, so you can arm, disarm and check the status of the alarm remotely, and see which zone triggered if it goes off while you are out.

What happens if the power goes off?

Panels are fitted with a battery back-up as standard, so the alarm keeps working through a power cut. We check battery condition at any service visit so it is ready when it is needed.

Do you fit alarms in listed buildings or older properties?

Yes. Wireless systems are often the better choice in listed buildings or older properties where running cable would mean disturbing original fabric, and we discuss this at the survey if it applies to your property.

Do you offer support after installation?

Once the panel is live, we remain on hand for battery checks, extra detectors, user changes or a fault call. The same number that booked your survey reaches us for anything that comes up afterwards.

Will the alarm work alongside CCTV or access control?

Yes. We also install CCTV, access control and gate automation, so a sensor triggering can be checked against camera footage and door activity from a single app instead of three unrelated ones.

Get In Touch

Start your free quote

Tell us what you need. We respond within 24 hours.

Contact Details

Phone

02843441141

Email

more@marioithelp.com

Address

11 Burrenreagh Road, Castlewellan, BT31 9HH

Follow us on Facebook

Coast Data Security Ltd

Need it urgent?

Call now for an immediate response.

Call 028 4344 1141Get a free quote
Privacy notice · Cookies · Cookie preferences